Retroid Classic Pocket Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic stand for Retroid Pocket Classic with a rounded bottom, 10 and 14-degree tilt. Blender file included.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
Simple stand with rounded edges except for the cutout for the Retroid Pocket Classic itself. 14-degree tilt so it matches the same angle as TrimUI Brick Display Stand by Rhith08. Inspired by Retroid Classic Gridfinity 3x1 storage bin.
The first version blocks the handheld's speaker, so there is another with a 56mm wide cutout for the speaker. It has some sharp edges and tiny walls. Surely it could be done better. There is a blender file included, though the booleans don't work as easily as they should, so it requires a bit more manual work.