Universal Spout with Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spout which can be mounted on any bottle cap
- Ocena
- 0 / 5
- Polubienia
- 85
- Pobrania
- 331
- Wydruki
- 2
- Wyświetlenia
- 1364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
When I designed the spout for 5-liter canisters, I also made a spout that is universally suitable for all kinds of canisters and bottles. The spout is fastened with a knurled nut and sits firmly and tightly on the neck so that no liquid can run past it. Liquid flows out slow but evenly with about 1,5 l/min.
All you have to do is drill a hole with a diameter of 24 mm in the lid:
Printed in PLA 0,2mm structural preset, no supports required. The nut may need a brim.
If the canister is completely full you may experience some glugging when you first pour it due to pressure and flow imbalance. But once some air has entered the container, the air bubbles should flow constantly.