1 / 4
Giant Fanged Toad 50mm & 25mm baseplates (DND / TTRPG) — zdjęcie 1
1 / 4

Giant Fanged Toad 50mm & 25mm baseplates (DND / TTRPG)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Giant Fanged Frog for DND and other TTRPGs

Ocena
0 / 5
Polubienia
17
Pobrania
102
Wydruki
0
Wyświetlenia
226
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

AI isn't always good at a lot of stuff out of the box but the giant toads are pretty good. For this fellow I just did a bit of sculpting on the fangs, then used the draw tool on the warts to thicken them up a bit and lastly added a skin texture (which can't really be seen much anymore since the remeshes were done). Overall I like this guy and while I should have added it to my Giant Toad Collection it has been long enough now that I think this one stands on its own.

I sized this for 25mm and 50mm baseplates depending on how giant you'd want this one. For FDM I would print straight up on the baseplate with minimal tree supports. I could have filled the underside a bit more to avoid painful cleanup but aside from the fangs there is very little on this model that could pop off and support scarring will only add to the aesthetic on this model.

Category: Games

Tagi