Ventilation 110x55mm 45 Degree Bend Flat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ventilation 110x55mm with 45 degree bend flat.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is parts for 110x55mm rectangle ventilation ducts. Orientation for print will depend on printer and you may have to experiment with support. Here is an example of a duct angled 45 degrees for better print and result with overhangs.
This model is a 45 degree bend for rectangle ventilation duct 110x55mm. It was updated on June 10th 2025 with a design a little bit easier to print (some 90 degree outside plane was replace with an 45 degree angled plane).
See also other 110x55mm parts https://www.printables.com/model/662010-rectangle-ventilation-110x55mm-parts and https://www.printables.com/model/840511-rectangle-ventilation-110x55mm-angle-90-degree-upr.
See also other 100mm and 110x55mm ventilation parts in the collection Ventilation.