1 / 1
Timing Belt Holder for 20mm Aluminum Extrusion Rail — zdjęcie 1

Timing Belt Holder for 20mm Aluminum Extrusion Rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

belt holder for mounting a 6mm-wide timing belt

Ocena
0 / 5
Polubienia
8
Pobrania
71
Wydruki
0
Wyświetlenia
236
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a belt holder for mounting a 6mm-wide timing belt to a 20mm-wide aluminum extrusion rail. Fastens to the rail with an M5 bolt and nut. Belt is fed through the bottom of the mount, back out the front, and clamped by two M3 screws.

Many laser engraver kits use this sort of drive mechanism and they recommend clamping the belt into the rail directly with a screw. This causes uneven tension and unnecessary friction. This clamp allows the belt to be mounted parallel to the direction of movement, for a much smoother motion.