Little Tikes Activity Garden Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement nut used to assemble the Little Tikes Activity Garden toy.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
My friend lost a few of the nuts to assemble the Little Tikes Activity Garden and asked me to design and print a few replacements. I was able to get a pretty close recreation. The threads are a little loose in my opinion, but that seems to be the case with the original as well. Hopefully these can save some of these toys from being thrown into a landfill!
Printing instructions: I printed these in both PLA and ASA at .20mm STRUCTURAL, 15% Gyroid infill, with supports on build platform only. They were printed straight up and down with the thread side on the build platform. I'm pretty impressed with how well the threads came out without any internal supports, so no need to have supports everywhere. For the ASA print, I used a 15mm brim to make sure they didn't warp as they cooled and they turned out great. I would recommend ASA for the structural advantages, but PLA did function fine (there was no load applied to them though).