1 / 1
The Shortened CP01 Endstop: Minimizing the Pain of Lost Travel — zdjęcie 1

The Shortened CP01 Endstop: Minimizing the Pain of Lost Travel

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Endstop for CP01

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The Shortened CP01 Endstop: A Simple Fix for Lost Travel Distance

Upgrading your 3D printer’s toolhead shouldn’t mean sacrificing valuable travel space on the X or Y axis. But sometimes, after swapping out an outdated toolhead, you realize that your printer just doesn’t move as far as it used to.
The solution? A shortened endstop.


What Is This Endstop?
This endstop is 20mm shorter than the original factory endstop, allowing your printer to recover some of the lost movement caused by the toolhead upgrade.
However, due to mechanical constraints, it can’t be installed at the bottom like the original. Instead, it realistically restores about 10mm of movement—still a meaningful improvement.


Installation Requirements
To mount this shorter endstop, you’ll need:
- M2 screw *2 (yes, that frustratingly tiny screw that’s somehow always missing when you need it)
- M2 nuts *2
- Proper alignment (since it won’t mount exactly like the factory version)

Why Use This Endstop?
If your upgraded toolhead shrinks your printer’s movement range, this adjusted endstop helps reduce the loss so you don’t have to sacrifice as much build space. It’s a practical, minimal-effort fix for a frustrating issue.
So while this modification won’t magically restore everything, it softens the blow—and sometimes, in 3D printing, that’s good enough.

 

Tagi