Air Condition Exhaust 90degree 150mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just added an vertical output to my ac exhaust, because bending the floppy air exhaust tube is not working good.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I just added an vertical output zu my exhaust, because bending the floppy air exhaust tube is not working good, and may block the very important hot exhaust air.
Printed in PETG, PLA would most likely melt, its like at 60Celsius hot air coming out….
Some sort of support material can be autogenerated, see the second picture to see how i did it.
I could wait 30h for a 0.3mm output on my prusa mk3s, but i just took my way cheaper way faster kobra 2 plus in the cellar, 10h it took on him on 0.2mm, and i'm super fine with the result.
For the guys that need to rotate the tube in the exhaust in the other direction: "Mirror → Along Y Axis" and you should be fine.