1 / 8
Roue de la Fortune - Wheel of Fortune — zdjęcie 1
1 / 8

Roue de la Fortune - Wheel of Fortune

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Piece pour la construction d'une roue de la fortune Parts for the wheel of fortune construction

Ocena
0 / 5
Polubienia
7
Pobrania
28
Wydruki
0
Wyświetlenia
371
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial

Bonjour à tous,

Voici des pièces pour construire une roue de la fortune.

La roue en elle même fait 65cm de diamètre découpée dans du komacel.

La base et les haubans sont découpées dans du contreplaqué.

Les pieds et la tête sont prévus pour recevoir des haubans en contreplaqué de 14mm d'épaisseur et 5cm de large.

Pas besoin de vissage, l'ajustement est suffisant pour tout maintenir sans jeu.

La roue tient avec une tige filetée de 8mm sur environ 10cm de long.

Il y a une bague arrière pour espacée de la structure et une bague avant pour le serrage.

L'aiguille se visse directement sur le socle.

L'impression a été faite avec 3 parois et un remplissage de 30% environ avec du PLA.

 

Hi,

This is parts for a wheel of fortune construction.

The wheel size is 65cm for the diameter and made with komacel.

The basement and beams are made with plywood.

Foots and head are designed for 14mm plywood and 5cm large.

No screw are needed for beams.

The wheel is connected by a 8mm threated rod by 10cm long.

There is a back ring for spacing and a front for tightening.

the needle is screew directly on the basement.

For printing, 3 walls and 30% infill of PLA will be enought.

 

Tagi