Nothing Phone 3a Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount made in Fusion360 for the Nothing Phone 3a and 3a PRO as they have same measures. Hole pattern is AMPS.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is a phone mount for Nothing Phone 3a and 3a PRO.
It is required with a rubber sleeve to make perfect fit.
The phone slides in from the top and is snugly held in place.
Connect an USB from below if u like (for android auto and/or charging)
It is designed lying on the back so simply rotate the mount standing up and you can add some supports for the holes in your slicer.
All corners are made with radius to give a soft/smooth touch
The hole patterns is AMPS (30*38mm) so mount is quite universal. There is also a big hole in center to save some materials and also give access to (in my case) a ball joint behind the mount.
I printed mine on Elegoo Centauri Carbon.
I used matte PLA but warmer countries should use PETG so it does not deform in summer heat in car.
Feel free to use and abuse the file. I can export fusion360 file as well if required