1 / 2
Jeffrey Yang's Flexi Alicorn wings with stronger joints — zdjęcie 1
1 / 2

Jeffrey Yang's Flexi Alicorn wings with stronger joints

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed v2 wings to increase thickness of the joints on one side by 1 mm. Hopefully someone might find useful.

Ocena
0 / 5
Polubienia
9
Pobrania
61
Wydruki
0
Wyświetlenia
290
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Discovered that the wing connections were too weak and some even broke when removing the part from the print bed. It could be an issue with my setup or profiles. In any case I increased the thinkness of the connectors by 1mm on one of the sides. It fixed the issue for me so decided to share in case someone else might find this useful. 

Note: I have not designed the original model. I only did a small modification to it. All credit goes to Jeffrey Yang for their work! 

P.S. Body STLs of the Flexi Alicorn can be found along the original model.