1 / 4
Organizer (stand) for drills from 1mm to 10mm in 0.1mm increments — zdjęcie 1
1 / 4

Organizer (stand) for drills from 1mm to 10mm in 0.1mm increments

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Удобное хранение сверл Convenient storage of drills

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
164
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Кейсы для сверл печатать с древовидной поддержкой от стола в рабочем положении (нижней частью на столе), верхняя часть где будет ходить задвижка в поддержках не нуждается. печать PLA или Petg слоем 0,2 сопло 0,4

Drill cases are printed with tree-like support from the table in the working position (with the lower part on the table), the upper part where the valve will walk does not need support. PLA or Petg printing layer 0.2 nozzle 0.4