Halloween teeth for cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
vampire teeth to install in the grille of a car
- Ocena
- 5 / 5
- Polubienia
- 140
- Pobrania
- 1046
- Wydruki
- 11
- Wyświetlenia
- 6735
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted halloween teeth for the miata and didn't like using just a flat piece cut to shape so I drew this up. Teef 1 and 2 are ~75mm tall while 3 is 120mm tall.
TEEF 1 are the one in pictures. Just changed dimensions so people would have something to pick from.
TEEF 2 is just a straighter version of 1
3 are same width but longer for bigger cars
it has holes for self tapping screws if you'd like to go that route but I'm seeing how well 3m tape holds up in this application.
the models are only for the right side and you'll have to mirror the stl in the slicer to get the other side