Makedo Discover Tool Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction…
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 326
- Wydruki
- 6
- Wyświetlenia
- 3110
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a series of slide-together trays, to store and organize the Makedo Discover set of cardboard box construction tools.
https://www.make.do/collections/all-products/products/a0126-discover
The "SCRU"/"SCRU XL" drawers are intentionally designed to have one hole for each screw in the kit, so that you will know if one is missing (before you step on it!). If you prefer, there is a drawer model included, that will hold all the SCRUs instead.
NOTE: There is an image with the dimensions of the rails and grooves.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
20%
Filament:
eSun PETG
Notes:
Print these at standard settings (20% infill, 2 shells) in PETG, but set the filament setting to bump up the bed temp to 105C after the first layer, to make sure it stays stuck to the bed flat.
If it does peel up (e.g. in the corners), you may have a little trouble sliding them together. If so, look for the "smooth" spots where they rubbed, and trim the rails with a knife.Turn on ironing for "topmost surfaces only", to make the top of the rails nice and smooth.
Category: Organization