Badge Alignment Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to hold standard ID badge Prox cards (2.125″ x 3.370″) in place to make aligning and applying overlays easy.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A 3D printed tool to hold standard ID badge proximity cards (2.125″ x 3.370″) in place to make aligning and applying overlays easy. Circular finger holes added as the fit is pretty snug and it eases removal of badges in the event you want to secure the alignment tool to a desk or work table.
Recommended Print Settings
- Layer Height: 0.2mm
- Infill: 50%+
- Walls: 3
- Top Layers: 4
- Rafts: No
- Supports: No
This model prints well with any desired infill, but recommend at least 50% to add to the overall weight (less infill is fine if using adhesive or suction to adhere to working surface). Also prints well with all filament types, example pictured and used extensively is PLA. Enable ironing or increase top layers if a smoother top layer finish is desired.