Neewer 600 LED Light Soft Diffuser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft light diffuser for Neewer 600 LED Photography light. 2 Styles, one which replaces the existing (almost clear)…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Soft light diffuser for Neewer 600 LED Photography light. 2 Styles, one which replaces the existing (almost clear) diffuser (white), and another that straps over the top of the existing one (transparent).
The existing diffuser isn't opaque enough to offer much in the way of soft light, so this will soften the harsh LED lights. For stronger diffusion, the strap-on could just be printed thicker, while there's a void in the replacement style that could be filled with thicker panels.
Strap-on requires 4X velcro straps / diffuser. Replacement style uses 4mm wide picture hanger as metal band for the existing magnetic latch.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.2
Infill:
25% Gyroid
Filament: Generic PLA White / Transparent
Notes:
Support only required for small tab on the replacement style (touching bed).
For the replacement style: Flatten 4mm picture hanger and wrap around top tab with groove facing light body.
Strap-on style has "feet" at each corner to protect the existing diffuser.
Category: Camera