1 / 1
Moorfield Thermal Evaporator QDevil Daughter Board Holder — zdjęcie 1

Moorfield Thermal Evaporator QDevil Daughter Board Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

A QDevil daughter board holder for a Moorfield Thermal Evaporator.

This holder screws into the evaporation plate of a moorfield thermal evaporator, and allows material to be deposited on the back side of a silicon chip without damaging the top side of the silicon chip.

Theoretically, you should be able to print this out of plastic such as PETG or ABS as the plate usually only gets to 50c.

Ours will be out of metal due to needing to ground the silicon chip.


10/1/25 V1.1 : Added grounding screw. Adjusted some internal dimensions to give more clearance to the motherboard.

Category: Other

Tagi