Elegoo Centauri Carbon - Side panel protector - Spool "dragging" along side panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Panel protector for the side panel / spool holder of the Elegoo Centauri Carbon.
- Ocena
- 4,952 / 5
- Polubienia
- 1059
- Pobrania
- 10 635
- Wydruki
- 117
- Wyświetlenia
- 24 370
- Oceny
- 125
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
All variant have holes for magnets 1,5x⌀10mm or you can use 2.0x⌀10mm, except for the 3x⌀6mm model.
Update 12-09-2025 - Added internal model
!! Prototype !!
Magnetic version to be used inside, if you want to use the internal spool holder + side panel spacers
With & Without logo.
Update 21-07-2025 - Added model
Offset to holder version also available without the logo and for 3x6mm magnets. Overal thickness of thickest parts is increased from 3.0 > 3.6mm in order to cover the 3mm thick magnets.
Update 23-06-2025 - Added models
Offset to holder version also available without the logo.
Original
After about 100 hours of printing, I started to notice some marks on the side panel due to the spool dragging along it. Some plastic particles could be washed away, but the first scratches on the side panel are there. Hereby some side panel protector variants, depending on the alignment you like.