1 / 2
Logitech Z-5500 stand for "Flexible & sturdy phone arm" — zdjęcie 1
1 / 2

Logitech Z-5500 stand for "Flexible & sturdy phone arm"

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mounts a Z-5500 speaker on top of the "Flexible & sturdy phone arm".

Ocena
0 / 5
Polubienia
5
Pobrania
23
Wydruki
0
Wyświetlenia
324
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Attribution

Uses https://www.printables.com/model/647794-flexible-sturdy-phone-arm-100-printed to position a Z-5500 speaker in the air.

Pictures are slightly outdated, there's now a small strip that prevents it from slipping even if the screws aren't completely tight.

I made this so I didn't have my centre speaker behind my monitor. It doesn't actually screw in, it's just using gravity to stay secure, but it won't fall over easily.

When printing, you'll need to enable supports but you can decrease the “First layer expansion” to like 1mm and disable supports everywhere except the bottom.

I'd recommend using https://www.printables.com/model/1031323-better-stronger-screws-for-flexible-sturdy-phone-a  for the screws.

Tagi