Window Vent
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A system to vent 3D printer fumes out a window
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a system to vent 3D printer (or other) fumes out a window. It is printed without supports. It accommodates a 4-inch inline fan.
The LeftWall piece sits to the left of the fan platform and the RightWall piece sits to the right of the platform. Then alternate as many BackWall and FrontWall pieces as you need to fill the span of your window.
I have included a step file so you can adjust the top and bottom widths to fit your window or make any other desired modifications. My window has a channel along the bottom that slides over the wall tops.
Fan: https://www.amazon.com/dp/B01M7S46YZ?ref=ppx_yo2ov_dt_b_fed_asin_title
Consider buying an outlet switch if you purchase this fan, since it doesn't have one.