1 / 5
FunkoPOP R2-D2 Jabba's Sail Barge Tray — zdjęcie 1
1 / 5

FunkoPOP R2-D2 Jabba's Sail Barge Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This design will fit my 3 legged R2-D2 FunkoPOP.

Ocena
0 / 5
Polubienia
4
Pobrania
20
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my own designed version to suit R2-D2 FunkoPOP in three-leg-mode. It's a bit taller than a two-leg one, due to the angle etc needed to mis R2's dome.

I have drawn up a tray with lipped edge glass holders, plus the option of having cups on as well.

And finally…..the drinks dispenser itself. I've uploaded a whole one piece and also a half sectioned version for ease of printing. This will require some cleaning up to be able to be attached to R2's dome [my 3 leg version].

Tagi