Amulet of Mara remixed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes chains, and strengthened loops for attachment. Also integrates the gem into the medallion as one piece.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 239
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Updated version of the amulet of Mara. I don't claim the design, that requires artistic skill. ;)
What I've done is update the model to include the gemstone as one piece for MMU or XL multi material printing. I've also beefed up the connection rings on the individual pieces. The original had them much thinner and free floating, requiring support to print. This way, they're touching the plate, thicker and sturdier.
The magnetic clasp is my own creation, using 5mm x 2mm magnets. Friction fit works fine but you can glue them as well.
I've also included Cuban chain to hang the amulet from, original can be found here: https://www.printables.com/model/666520-parameterized-cuban-chain
Finally, you're going to need a dab of glue to assemble the bead at the centre, as well as some split rings to hold it all together. Those are here: LUTER 1000pcs Open Jump Rings,... https://www.amazon.ca/dp/B0B1ZQWQCC?ref=ppx_pop_mob_ap_share
UPDATE: Commission printed and subsequently field tested. 100% proven to work as intended. Gift with caution, may cause ring shopping.