Steelcase Reply Chair Replacement Armpad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steelcase Reply armpad. (larger than the steelcase please armpad)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I needed new armpad for steelcase “reply” chair and could not find any. The “please” model i “remixed" looked correct, and while it has the same screw pattern, the reply chair has a larger armpad so did not fit. I rebuilt this model from scratch but will mark as remix for the inspiration.
Right now I used PETG and lightly sanded the corners. added a slip on armpad cover that I printed out of 95A tpu with thin walls and low infill as a cushion. (do not have photos of armpad)
I have skipped the middle screwhole for time. modeled with onshape free at https://cad.onshape.com/documents/f473ad80676886242ad77c21/w/f2e7abf2fb5c22a6a18377eb/e/d6127dd1c12b0567d8516b52 and feel free to modify with cc public with attribution.