D6 Dice with Rounded Corners Concrete Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-part mold for better finished concrete sculptures. Can be used for DIY fitness maces and gadas.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 501
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Featured at the Rocky Mountain Rep Rap Festival 2025!
I used this to make fitness maces that I swing, however they could be used as garden decorations or punishments for your TTRPG group sessions :)
At 100% scale, the final concrete weight is about 6 kg/13.25 lb and the size is around 140 mm^3/5.5 in^3.
The guide for pouring the concrete is a work in progress, but I wanted to share the models for anyone interested in trying it out. I used petroleum jelly as the release agent, as it also smooths out the layer lines.
I also included the actual D6 model, in case anyone came here looking for that model.
Print one of each part, pips up. Use duct tape to assemble. For positioning “realistically”, the 6 and 1 are opposite, the 5 and 2 are opposite.
Printing details
- Filament: PLA (more rigid than PETG)
- Layer Height: 0.2 mm
- Parameters: 4 or 5 walls (for extra strength)
- Top and Bottom layers: 5 (for extra strength)
- Infill: 40-50%