Needleplate for Consew 206RB with mount for rt angle binder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the use of rt angle binder such as Connsew 206rb or clones
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My right angle binders did not fit my industrial sewing machine (Tacsew T111-155) which is a clone of Consew 206rb so I designed this needle plate:
https://www.ebay.com/itm/231937000160?gQT=1
but the mounting holes were wrong for my binders below.
https://www.ebay.com/itm/143603162035?var=442561430818
I printed in abs 42%infill and no supports upside down. Two M3 x 8 BHCS and M3 nuts are required to secure the binder to plate. Screws from original needle plate can be used install the plate. It sits a little proud in order to give it more strength.
I've only used the proper binder foot. I doubt regular feet will work on anything thick.