Star Wars Corellian Gunship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of a DP20 Frigate aka. Corellian Gunship from Star Wars.
- Ocena
- 5 / 5
- Polubienia
- 167
- Pobrania
- 701
- Wydruki
- 1
- Wyświetlenia
- 2503
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The DP20 Frigate, also known as the Corellian Gunship, is a compact but heavily armed vessel - it carries 18 turrets of varying sizes.
Being an old legends design, there are many different versions of this ship. This model is based on the only good image from canon I could find (from the reference book “The Rebel Files”).
There are two versions - one at 1:2000 scale and one at 1:500.
1:2000
It's 6cm long, 2.5cm wide and 1.3cm tall. It's split along the horizontal axis into two halves for printing.
Printed at 0.07mm layer height. Requires supports everywhere. Removing the supports underneath the big twin turrets will be tricky.
1:500
It's 24cm long, 10.4cm wide and 5.3 cm tall. (8.9 cm wide and 4.8cm tall without the turrets.)
The turrets are printed seperatly, which means there are a lot of small parts.
| Part | Copies | Supports |
|---|---|---|
| dp20-1_500_bow | 1 | supports on buildplate |
| dp20-1_500_stern | 1 | supports on buildplate |
| dp20-1_500_small_twin_turret | 8 | supports on buildplate |
| dp20-1_500_quad_turret | 6 | supports on buildplate |
| dp20-1_500_big_twin_turret | 4 | supports on buildplate |
| dp20-1_500_stand | 1 | none |
Base
Also included is dp20_base.stl, which reflects the model without any modifications - The other versions are modified to make them print properly, but this one isn't. Therefore it is not optimized for printing. The scale is 1:1000.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#