Holder for emergency pause/start xTool lasers button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for xTool Button switch that increases the stability of the button and prevents accidental activation.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder for xTool Button Switch
This one button is for the xTool F1 & F1 Ultra Laser Engraver. The button has a long USB cable, which allows you to move it away from the laser to a more accessible place. The button allows you to start, pause, and repeat the engraving process.

However, the one button is too light, so the wavy cable lifts it. The holder adds weight and stability. Thanks to the increased weight, it does not slide on the table.

The button is used to start/pause the process. It is very sensitive, so it needs protection so that it does not accidentally start, in case you have the protection turned off when the chamber is open. The holder has a ring that prevents accidental start.