iMac Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy stand for your Late 2015 iMac (Retina 5K 27-inch)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this sturdy stand to elevate my Late 2015, Retina 5K, 27-inch iMac by 40mm, so I would perfectly align with my second monitor.
The stand needs to support about 9,5 kg (21 pounds) on a relatively small footprint, so I suggest adding sufficient infill and add some perimeter, depending on the filament type you choose.
As the dimension were to large to fit on my Prusa MK4S plate, I designed it in two parts to be assembled with dovetails.
I wanted to have it in AddNorth Cold White E-PLA, so I used 3 perimeters and 20% infill. That may probably be overkill, but yes, it is sturdy ;-).
The included 3MF file has the two elements on two plates with the settings for AddNorth and 20% infill.
I include the Fusion file in case you'd like to adapt it, E.g. a different height.