Beer Chiller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skinny Beer Can Chiller drill attachment
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
There are no slim can beer chillers out there, so I decided to make one! This is printed in TPU so it has some wiggle room with the fitment, but this is a tight fit on a slim Michelob Ultra can, so it won't slip out when it spins. There is a small hole at the bottom to let the air escape when you push/pull the can into it.
The recessed hole fits a chamfered M8 bolt, sits flush with the bottom so it doesn't hit the can. Add a nut to the other side, pop it into your drill and presto--beer chiller! Spin this in the drill for a minute, swap sides (bottom to top, vice versa) and in 2 minutes you got an ice-cold brew. Cheers!
The print profile has this with 0.28 layers as I wanted more strength in it, but you can definitely knock that down if you want.