Filament Spool Roller for use with common bearings - Floor or Wall Mounted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rollered spool holder to be used on desk or wall mounted. Has attachments for PTFE tube to allow remote mount of spool
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overview:
After commiting to buying my Elegoo Centauri Carbon i had a task to modify it so that i could place the printer in the perfect spot in my home. That is,in a corner with the rear and right sides against the walls. Therefore the spool holder needed to go and the Purge shute needed more thought.
Firstly, i have made a remote spool roller that can be placed on a desk/floor or wall mounted (bracket included). It currently has 2 interchangable take offs that allow 4mm PTFE tube to be attached for direct connection to the Run Out Sensor:
https://www.printables.com/model/1317922-elegoo-centauri-carbon-runout-sensor-new-base
this means you don't need direct access to the Run Out Sensor, the original spool holder can be removed and the right hand side of the printer placed against the wall (see pics)
I printed them using Tinmorry PETG Metallic Space Grey and Ivory White at 0.28 Layer height with various settings for added strength where i thought it needed it.
Assembly:
You will need to use 4 x 608 bearings, 8mm ID x 22mm OD x 7mm Thickness.
These need pushing into the ends of the 2 Rollers and then place them into the Base. Use the 2 Axles to attach them to the base by sliding them through the holes, being careful to align them in the correct orientation that allows them to be pushed flush.
Print off either or both of the Outlets and slide the selected one into position on the Base end.
Thanks