Ikea LILLABO Concrete mixer top REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Concrete mixer for Ikea LILLABO car
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Share Alike
A simple concrete mixer rear side for Ikea's LILLABO toy car base. Compatible with existing car and truck front pieces.
Instructions
- Print the piece as oriented with pegs (a model without pegs has been provided if you already have some from other printings)
- Attach the pegs to the slots (you may need some force to get them to snap into place; a metal dowel or needlenose pliers should help)
- Snap the piece into place on the LILLABO base (attach this rear piece last after any front piece)
- Sometimes if the base slot is too tight the pegs can pop up; press them back into place
Recommended Print Settings
- 0.4mm nozzle
- 0.2mm layer height
- 10% infill
- No supports
- Any filament that isn't flexible
- Print as oriented
- Seam set to Left (not auto or Sharpest Corner)
Other Pieces
The full collection of pieces in this set includes:
- Car front
- Semi-truck front
- Construction vehicle front
- Concrete mixer rear (remix) (you are here)
- Dump truck rear
- Pickup truck rear
- Ambulance rear
Acknowledgements
The car model used in the photos is by @IL3D.
Original Description
Found the base in a second-hand store, so I made a top myself! It's a truck, which is not available like this at IKEA either.
It's intended to print on the side of the exhaust pipe with support to the build plate only (for the connector pins). That way you should get maximal strength in the pins whilst having minimal cleaning to do afterwards.
The concrete mixer part is printed in 2 pieces (base on the side, barrel standing) and connected with whatever screw you have lying around.