Sighting device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Device for simplifying sighting
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is mount for cheap laser pointer on 14ccw thread.
I use cheapest pointer as I find on local markets. Measured the diameter. And make tube, that starts with 14ccw and then transforms to empty 16mm inner diameter tube.
I like to reassemble my airsoft toys by swapping out external attachments and scopes. And then I have problem. After replacing the sights you need to shoot a little to reconfigure them.
This device allows reconfigure sight without shoots. Just mount to barrel and turn it on. The laser indicates the expected point of impact. Then you should configure scope to this point. (At the first photo you see that point of impact is little bit righter then scope point. And to configure horizontal axis I rotate it to right till until the points matched) . After points matched you need a little bit move scope point up, It needs cose we have hop-up module that throus bbs upper then line of barrel.
It's much easier than shooting, then looking at where you hit, making adjustments and shooting again.
But you only need this device if you have to frequently re-adjust your sights.
I hope that I am not the only one who faces this problem and this device will be useful to at least someone else.
If you need a mount for a different size laser pointer, write its outer diameter and I can add a version especially for you.
Have fun, and goodluck in games!
Support me, or download .blend files to simply modify yourselfs:
https://www.printables.com/model/1320032-sighting-device