1 / 2
1.33U tray for 10 inch rack with 4x NinoTNC + room for Pi
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1.33U-high tray for a 10 inch rack, with space for 4x NinoTNCs + a Pi.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1.33U-high tray for a 10 inch rack, with space for 4x NinoTNCs + a Pi.
The NinoTNCs need 15mm+6mm M3 brass spacers. The Pi needs 20mm spacers. The Pi and the NinoTNC have the same hole spacing and board width.
The holes are for 6mm diameter toggle switches / LED holders.