Berning Robot Lens Rear Cap M26.5x0.75
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple rear cap for lenses with earlier uninterrupted Berning Robot screw thread mount, Robot IIa, Robot Star etc.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple rear cap for the lenses for the earlier Berning Robot models (Robot IIa, Robot Star, Junior, ....) that have a regular thread. Probably won't work with the interrupted screw thread of the later Robot Royal.
Printed on my Q1 Pro with cheap PLA and standard settings, 0.08mm layer height to get the fine threads plus adaptive layers for the base, though a coarser layer height will probably work as well.
On the stock spring steel build plate I had no need for any support, raft or brim. Depending on your printer's accuracy you may want to fine-tune XY or Z dimensions.