Low Poly - Shadow Guardian (No AMS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stylized low poly guardian figure with snap-in eyes – perfect for multicolor printing without AMS.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Low Poly – Shadow Guardian
A stylized low-poly guardian statue with clean geometry and sharp edges.
This model comes with separate snap-fit eyes that can be printed in a different color and inserted manually – no AMS required.
The figure itself prints in one piece and the eyes include a plug-style pin to ensure a solid fit.
Features:
- Snap-in eyes with tested fit
- Print-in-place body
- Works great with matte, silk, or standard PLA
- No AMS required – but AMS print profile is also available
Tip: The eye plugs should fit directly post-print. If needed, scale them ±2 % depending on your printer and material.
Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)