1 / 8
Remixed X20 6Ah or 3p5s battery extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extend 2Ah battery to 6Ah or 3p5s of your choosing
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
- Extend the 2Ah to 6Ah battery. Glue the extension to the existing batteries, I used MS polymer glue. Other glue which can glue the print to PA should work fine. Mine are printed in ABS.
- Use a spot welder to connect the the new batteries to the original batteries
- Glue the case extensions to the top with super glue (ca glue)
- Screw the extensions of the screw mounts to the jig. Next glue it in with a glue which can fill the gap. I used backing soda and super glue.
- Assemble the batteries, if the batteries have play in the case. Print some TPU spacers and scale them when need in the slicer.
More details can be seen in the video on the page of the model I remixed.
BOM:
- glue
- 10x 18650 batteries with 2Ah
- 4x M3x30 hex screws