1 / 4
Zebra ZT410 Media Hanger v1 - Closer to original design — zdjęcie 1
1 / 4

Zebra ZT410 Media Hanger v1 - Closer to original design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For rolls with smaller inner diameter (40 mm in my case).

Ocena
0 / 5
Polubienia
2
Pobrania
48
Wydruki
0
Wyświetlenia
238
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Use M6 screw with washer and spring washer for the pin. Tight is just enough it can slide with expected amount of friction.

In case hanger is leaning under the label roll weight, you can use another M6 screw on the top, leave approx. 1 mm gap and hang it on the metal plate.

Replaces part #: P1058930-042

Tagi