Better Flooring Spacers (Low profile)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile flooring spacers for LVP flooring
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are better designed flooring spacers for LVP (Luxury Vinyl Plank) flooring. These go between the wall and your starter row of flooring to give an expansion space. Other models of spacers are too thick and they are either hard to get under the sheetrock or get stuck when you try to remove them, so these are low profile (1/4in) and feature grip points for you to grab on the end. I also rounded the edges on the outside to allow easier removal.
These come in 3 sizes, Small (5mm), Medium (9mm), Large (12mm). I made multiple sizes because I found that once you get to the other side of a house it's often not perfectly square from where you started and you need one end to have a bigger spacer than the other end.
PRINT SETTINGS:
Any hard filament will work (PLA, PETG, ABS)
Print on it's side with support
Any layer height works from .2 to .28
If you would like to leave a tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ