Nerf Nitefinder Rival Silly Shell Reskin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compatible with rival round silly shells, single shot springer based on spring, plunger and tube from nerf Nitefinder.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
THIS IS VERY EXPERIMENTAL, I don't reccomend printing this unless you are familiar with nerf homebuilds as the files probably need some tweaking to fit the hardware you have on hand.
HARDWARE I used:
- plunger, tube and spring from a nerf Nitefinder
- I reccomend getting a big multipack of m3 bolts and heat insert nuts, as you will need 19 of each in various lengths
- You will also need 2 O-rings approx 16mmID 20mmOD
- and 3 pen springs
You will need to use a hacksaw to remove the barrel from the plunger tube of the nitefinder. Saw delicately down the join between the two and they should come apart easily. You will need to then remove the small plastic part and spring inside the end of the plunger tube that limits airflow if a dart is not inserted.
Please if you make any tweaks reupload your changes : )
Printed at 0.2mm with a bambulab A1 mini