STLINK-V3SET Spacer Plate With Pin Protector and 2mm Shrouded header
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to use the original back cover and protect the pins at the same time
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 131
- Wydruki
- 1
- Wyświetlenia
- 380
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
I wanted the original cover with my ST-Link V3 enclosure. This allows you to just use all your existing back plates and keep your cool serial numbers. I included my STEP files of the reverse engineered enclosure. you can also get them at my GrabCAD page
2 versions provided (No support. loose fit), and Fancy Injection molding style snap fit version but requires printing with support.
Using a 24mm M3 bolt makes disassembly and tightening easier!
Printed with Navy Blue Matte PLA , the plastic color matches “Regal Blue” if you can find it
- M3 25mm Screw ( get rid of the stand offs )
Plastic Colors
- Symphony Blue #22455D (L: 27.71, a: -4.22. b: -18.20) (r: 34, g: 69, b: 93)
- Gray Mist #BBBDB0 (L: 76.17, a: -3.23, b: 6.21) (r: 187, g: 189, b: 176)
Filament Used:
ERYONE Navy Blue https://www.amazon.ca/dp/B0CHF925WX
OVERTURE Matte Navy Blue (Closest Color)
Printing Instruction:
For Supports always print with concentric pattern for the support interface to make it easier to remove.