Formlabs Fuse Powder Hopper Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for the powder hopper of the Formlabs Fuse1. It limits airflow and therefor moisture while not printing
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lid with a rubber lip for the powder hopper of the Fuse1. This way you can limit the airflow and therefor the moisture that the powder in the hopper is exposed to.
The lip is to be printed in TPU and the lid itself can be printed in any material (I went for PETG). Both parts require no supports. It just about fits the build size of MK3/MK4/Core One.
Disclaimer: Be sure to take the lid of when printing so that the powder can flow freely and does not get stuck due to some sort of vaccum effect. There are gaps in the hopper where air can flow through but I would not risk printing with the lid on.
Usage: This two part design requires you to place the rubber lip first and then squeeze in the lid. In the near future I will add a multimaterial model where its all in one part as I just received the Prusa XL.