Speedloader with Print-in-place lever (SLS)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Speedloader top part connected to the lever with a print-in-place hinge for printing it in SLS.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 456
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I did not find the right sized screw but I have the opportunity to use a SLS printer so I quickly made a print-in-place hinge to connect the lever to the top of the Speedloader case. Maybe someone is happy to use that as well. After a little sandblasting the hinge should get turning.
Get the bottom of this great, great gadget from the OG @MrFlippant or go for the remix with the handy filament guide done by @Shakie_1247699
Disclaimer: It's not ment to be printed on FDM printers. I doubt that it will work but feel free to try. If you do, let me know if it worked! :)