1 / 3
Chair feet repair using an M8 threaded rod, Silk PLA and TPU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair for broken feet by embedding an M8 rod in the wood. FreeCAD model included.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This was a repair for my specific chair.
I modelled the shape for the leg and designed a drilling guide to drill 8mm holes strait into the wood. The thredead rod is embedded about 6cm in the wooden leg. The body of the foot is printed in silk PLA and is attached with a nut. The bottom of the foot is printer in TPU.
The FreeCAD model is included if someone has a similar need.
