1 / 1
Two-color sphere for MMU/IDEX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick model I made with OpenSCAD to test a multi-material printer by making a decorative sphere
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Public Domain
I made this to test my new IDEX printer, and much easier to print than a 3D benchy. It isn't anything revolutionary, but I do like the final part as a decorative piece.
- The base model is kinda large, I scaled it down to 60-75%
- Obviously it's difficult to print a sphere on a flat build plate. I lowered the z-height of the model so that it was “sunken” into the build plate, clipping the bottom to create a small flat surface.
- Each color is a separate body, so your slicer will generate perimeters for every cell in the cube. The end result is pretty dense regardless of your settings.