Protoxtruder 2.0 Ebb36 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Btt Ebb36 on the Protoxtruder 2.0 by nhchiu
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 530
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print using ABS/ASA or PETG, default settings
Strain relief for the CAN Cable built into the model, i designed it with 8mm cable in mind but works with other sizes
The spacer is for extra support that i recommend using. The spacer will need you to change the screw under the idler arm to m3x20mm. Screwed directly into plastic
2 Versions of the mount:
The default mount uses heatset inserts to mount the board to the mount.
DS version stands for direct screw, like implied screws into plastic
Board mounting screws are regular m3x8 screws, any type of head will do even countersunk if you feel like it.