Beeline Velo 2 - 30mm handlebar mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beeline Velo 2 offset mount for 30 mm handlebar
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 454
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
30 mm handlebar mount for Beeline Velo 2 “bike computer”.
What you need:
- Two M3x5 screw inserts
- Two M3x8 screws for assembly
- One M3x12 screw for hinge
Inner diameter of the handlebar part is 32 mm, you can fit little rubber bit on the inside for extra grip and less load for the plastic. I'm using bit of old puctured inner tube.
This goes on the right side of the handlebar. If you need left side version, mirror in the slicer.
Printed with tree supports, no brim, atleast 3 walls, gyroid infill. Printing parts in the orientation shown in the slicer image provides best physical strength.
Use thread locker on the screws to avoid vibration related problems.
ASA was too brittle and didnt last in real life.
PLA works great. If you are afraid of drooping in hot climate, use HT-PLA.
Designed with Plasticity CAD