TrueRC X-AIR Antenna mount for HDZERO Goggles with Walksnail Receiver Quickmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple but effective quick mouting system for a Walksnail Receiver onto HDZERO goggles
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
This design will allow users of HDZERO goggles with X-Air antennas to quickly mount and dismount a Walksnail VRX without interfering with, or removing, existing antennas. The Walksnail VRX mount simply slides onto the sprung pegs on the two X-Air mounts, and snaps into place, providing a stable and secure mount. Two standoffs are integrated into the X-Air mounts to protect the HDMI cable and optic adjusters. An HDMI cable tidy is provided on the left X-Air mount if required.
The parts are designed to be printed suport-free in the material of your choosing with the suggested print paramters of 0.2mm layer height; 2 perimeters; 3 top and bottom layers; and an infill of 15%
**Instructions**
Print the three parts in the orientation shown and using the recommended settings specified below.
Attach the two X-Air antennas to their respective mounts using 1.5mm VHB tape and then slid the assemblies fully onto the rail mounts of the goggles.
Attach the VRX to the VRX mount using 1.5mm VHB tape and slide the assembly onto the pins on the mounts that are already fitted to the goggles.
Attach an HDMI cable between the Goggles and the VRX.
The [HDZERO HDMI cable](https://www.hd-zero.com/product-page/hdzero-mini-hdmi-cable) is recommended for connecting the VRX to the goggles.
The [HDZERO XT60 cable] (https://www.hd-zero.com/product-page/hdzero-xt60-dc-cable) is recommended for powering both the VRX and the goggles.