Various phone holders for Linocell Magsafe Qi2 charger.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of modular car holders for mobile phones based around the Linocell Magsafe Qi2 charger.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
All parts is based around the Linocell Magsafe wireless Qi2 charger.
Naturally, it is based on my own phones and use but it may also be a base for other peoples use.
Currently supported:
- Google Pixel 7 Pro
- Google Pixel 8 Pro (the 8 Pro fits the 7 Pro holder but it is a bit tight so I bade a couple of 8 Pro versions)
- Samsung Galaxy S9
- Huawei Mate 10 Pro (no Qi charging unless phone is supplied with external Qi coil).
No particular printing instructions other than avoiding PLA for use in the car due to deforming in the sun.
I like to use organic supports. Takes a longer time to print but uses less filament and is easier to remove.
Most parts benefit from being tilted about 45 degrees to minimise both the use of supports and lesser print time.
The QI2 hole is quite a tight fit so depending on your printer, you may need to scale it up a tiny bit or take a little bit out of the hole with sand paper or chamfer the inner edge with a knife. Just make sure that the USB-C socket ends up in the middle the hole so that there are space enough for even the larger USB-C plugs.
More parts may appear every now and then…