Tapo C100 Core One Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small mount compatible with the Tapo C100, held in place with magnets - easy to adjust angles and positioning.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a small camera mount I made for the Tapo C100, to slot into the top corner of the core one like the buddy 3D camera does.
You can remove the base of the C100 and then insert the ball into the joint, there is an optional collar too which can be used to tighten the camera to enable placing it at an angle.
It is held in place using magnets, I bought these ones off of amazon and it works a treat:
N35 Neodymium Magnets 8mm dia x 4mm thick: https://www.amazon.co.uk/dp/B00TACMJ8A?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_5&th=1
I've uploaded the raw FreeCad file too in case you want to tweak anything :)
Printed with the default 0.15 structural settings, but with supports enabled and a pause to insert the magnets.