1 / 2
Mount Case for DC House Battery Monitor for Ryobi RM480e — zdjęcie 1
1 / 2

Mount Case for DC House Battery Monitor for Ryobi RM480e

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It reuse the existing hole of the original monitor.

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This is designed for the monitor that comes with the DC House lithium battery. It replaces the original monitor and reuses the existing hole. Power is supplied via the USB port. To mount the panel frame, you’ll need four M2x8mm pan head screws.

For the base, the threaded section should face upward. If your slicer allows, disable support for the threaded area to ensure clean threads. However, support is still required for the hollow section.

For the threaded ring, I recommend printing without supports. If the threads are not clean, you can screw the two parts together with some force to clear any debris. Repeat a few times—eventually, the threads will become smooth.